AA-30 Analyzer by RigExpert a powerful antenna analyzer

RigExpert AA-30 – HF Antenna Analyzer (0.1 to 30 MHz)

1307
AA30 RigExpert
RigExpert AA-30

RigExpert AA-30

rigexpert-logo

RigExpert AA-30 is a powerful antenna analyzer designed for testing, checking, tuning or repairing antennas and antenna feedlines.

Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers).

Easy-to use measurement modes, as well as additional features such as connection to a personal computer (to plot Smith charts, etc.), make RigExpert AA-30 attractive for professionals and hobbyists. It is quite important that graphical display of various parameters over a wide frequency range is a key feature of these analyzers which significantly reduces the time required to adjust an antenna.

The following tasks are easily accomplished by using RigExpert AA-30:

Rapid check-out of an antenna
Tuning an antenna to resonance
Antenna SWR and impedance measurement and comparison before and after specific event (rain, hurricane, etc.)
Making coaxial lines or measuring their parameters
Cable testing and fault location
Measuring capacitance or inductance of reactive loads

Specifications

Frequency range: AA-30: 0.1 to 30 MHz, AA-54: 0.1 to 54 MHz

Frequency entry: 1 kHz resolution

SWR measurement range: 1 to 10
SWR measurement for 50 and 75-Ohm systems
SWR display: numerical or easily-readable bar
R and X range: 0-1000, -1000-1000 in numerical mode, 0-200, -200-200 in graph mode

Display modes:
– SWR at single or multiple (AA-54 only) frequencies
– SWR, R, X, Z, L, C at single frequency
– SWR graph, 100 points
– R, X graph, 100 points

RF output:
– Connector type: UHF (SO-239)
– Output signal shape: rectangular, 0.1-10 MHz (AA-30)
– Output power: about +13 dBm (at 50 Ohm load)

Power:
– Two 1.5V, alcaline batteries, type AA *
– Two 1.2V, 1800-2700 mAh, Ni-MH batteries, type AA *
– Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
– When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface:
– 128×64 graphical backlit LCD
– 6×3 keys on the water-proof keypad
– AA-30:menus and help screens in English language
– USB connection to a personal computer

Dimensions: 22X10X3.6 cm (9X4X1.5″);

Operating temperature: 0-40 C (32-104 F)

Weight (including batteries): 400g (14 Oz)

 

REVIEW OVERVIEW
Editor's rating
Price/Value
Innovation
VIARigExpert AA-30
Previous articleRSPduo – High performance dual tuner SDR by SDRplay
Next articleRigexpert AA-30.Zero
DXZone
The DXZone merges amateur radio and Internet, since early internet days. Established in 1996 as a radio-related-mailinglist, has registered its domain name in 1998. Main goal is to review and promote ham-radio web sites, classifying them in categories. The DXZone is managed by ham radio operators with ham radio operators in mind.
aa-30-analyzer-by-rigexpert-a-powerful-antenna-analyzer RigExpert AA-30RigExpert AA-30 is a powerful antenna analyzer designed for testing, checking, tuning or repairing antennas and antenna feedlines.Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers).Easy-to use measurement modes, as well as additional features such as connection to...

Leave your Comment

Please enter your comment!
Please enter your name here